The beginning of a 8' x 12' hoop house
Lay down road base or crushed gravel and pack it down until it wont compress any further
2x6" boards on top of road base,
EMT anchor posts that keep the greenhouse from blowing away
Hoops bent and installed on anchor posts
Roll up side rails and wiggle wire channel,
5/16" eye bolts to support roll up bar and to attach ropes
Wiggle wire channel attached to stringers
Installing end walls after erecting hoops
Plywood mounted on west end wall
Strong ties to connect 2x4's
East end wall with door hung
Raised beds mached up made from untreated 2x12's
After 11hrs of work, the door and east end wall took half of that time to install
All wood work done
Back Wall Stained
Back wall with cedar strips
Doors open
Work Bench
Aquaponic tray (2x8ft)
Under soil Heating and Cooling
150w Aquarium heater (one of two)
Almost Finished, needs finishing touches
Roll up sides
Polyethylene Endwalls
Green Wall planter
Drain Holes
Green Wall/ living wall mached up with irrigation
No comments:
Post a Comment