Thursday, October 8, 2015

Compost Heating and Anarobic Digester


Material List
Old Industrial/commercial hot water heater       Free
5 rolls 1"x100' Poly pipe/Irrigation pipe            $150
1" Plastic Hose Barbs                                        $5
.75"- 1.75" Stainless Hose Clamps, 10pk          $9
  
Old Hot water heater, 100 gallon tank


100 gallon Steel tank in the canter of the pile 


Poly pipe coiled around tank

1" poly pipe

Flange welded to tank lid and body


Large innertube thats cheaper than car tube, UV stabilized, yum.

Fresh Woodchips

Woodchips are watered throughly before adding to pile

Adding food scraps and Coffee grounds to woodchips

Hot Mix piled up against digester tank.

Hot mix: 10 woodchip : 5 Food Scraps/Coffee Grounds
lots of water, 100gal per yard of mix

Second winding of poly pipe, wrapped tightly around the pile

Un-coiling tubing


Woodchip pile mixed with food scraps,  ready-to-go hot mix

Starting second layer of compost

I piled hot mix around the pile and added water, coffee grounds and food scraps

Coils spaced at  6-8"

 Pile of hot mix

 140deg F

Pile hot mix, water heavily and pack it down, I jump and stomp it down with my feet

Pile it on

Removing material from the sides after material is packed

Removed material to see depth/thickness

Third coil of poly pipe

Poly pipe connected with hose barbs and hose clamps

Third coil of poly pipe

Pre mixing hot mix
 1 part Nitrogen to 4 parts Carbon
1 cuyd gets 150gal of water

Mmmm ...Kale 

Adding another 18" layer of hotmix compost


Lots of compost, at 50 cubic yards here



The Tank top is at 6 feet high





Top siliconed and bolted on the tank after filling with compost slurry
80% Compost slurry : 20% Air space

Tubes entering drain pipe

1" Poly to 1/2" Poly pipe and off to the greenhouse for heating needs

Sunday, October 4, 2015

Compost Trommel / Sifter

Compost sifter almost finished, currently testing
8.5ft long drum
Total length 9.5ft

12) 3/4"x10' EMT Conduit     $43
4) 1/8" x 1.5"x 96" Flat rod     $18
4) 1/8" x 1"x 96" Flat rod     $12
120) Tek Screws 14 x 3/4"      $7
1) Plywood 4' x 8' x 15/32"     $20
HDPE 20mil plastic, 60 sqft.      $30
Used hole saw, 1.5" dia       $5
Wire mesh 1/8" x .14", 4ft x 12ft     $210
Aluminium Flashing, 12ft x 1ft cut in half lengthwise  $10

Total Cost $355

the other material were found or all ready had
55gal drum
heavy duty drill
Bike frame
Bike parts for bearings and chain drive


55 gal steel drum cut into rings
attached rings to main axel sleeves with 3/4" conduit

The "Wheels" are connected together with 1/8" flat rod to make a sifting drum 8.5ft long.
Aluminium flashing strips added on the ends, this helps to move the material into and out of the sifter.  

Drill with chain drive and dimmer switch speed control

Output side

Input side

Steel screen with 1/8" mesh, the screens were by far the most important part I bought

Ye olde Drill

11t cog welded to 1.5" hole saw with a 3/8" shank

11t cog drives 44t chainring, 1:4 reduction... something like 1:10 would be better, more torque is more better

Sifting woodchip compost,
 lots of worm castings

Discharged material


Monday, July 20, 2015

Aquaponic Dome Durango



Sprouting Operation

Hand Washing Station

Sediment and Duckweed catchment barrels

Duckweed grown to feed the fish

Worms for sale

North Wall

Lower aquaponic tray

Cilantro Pots

Carrots in aquaponics

Lettuce mixes in 3 gal pots

South Wall, Lower tray

Water cress and duckweed

Feeding Goldfish and tilapia worms

Tilapia eating worms

Sprouting trays for sunnys

Basil on top trays



Mature basil plant after two harvests.
 This plant was started on 3/11 
moved to a 6" pot on 4/27  
4.5 months old
 3 months old from transplant
ready to pesto or compost or give away


DHS Greenhouse Project

12'x24' footprint, double wall polycarbonate

Steel Reinforcement cage


Cement foundation and pathways